1. Small Brass Gear: SMALL BRASS GEAR AS SPARE PARTS FOR TANNING DRUM, The wooden drum produced by our company is widely used in the skim, tanning, liming and dyeing of cowhide and sheepskin in the tanning industry. The pinion is mounted on the main shaft of the reducer to make the pinion run.
2. Bronze Gear For Gear Box Of Tannery Drum: This small bronze gear is assembled in the gear box, to match the big gearwheel. The bronze material is with high strength and soft to protect the big gearwheel.
3. Reducer For Leather Machine: The reducer is a relatively precise machine. The purpose of using it is to reduce the speed and increase the torque.
4. Reducer Brake Pads And Seals: The brake pads are used to brake the reducer to stop the reducer.
5. Reduction Box: There are two main functions of the reducer. The first is to reduce the speed and increase the output torque at the same time. The torque output ratio is multiplied by the motor output and the reduction ratio, but pay attention not to exceed the rated torque of the reducer. Secondly, the inertia of the load can be reduced while decelerating, and the reduction of inertia is the square of the reduction ratio.
6. Rubber Seal Strip For Tanning Drum: Spare parts of tannery drum，Used to seal tanning barrels, play the role of shock absorption, waterproof, sound insulation, heat insulation, dustproof, fixation, etc.
7. The Electromagnetic Calve: Solenoid valve function: It is a shut-off valve that automatically switches on and off by electromagnetic force. It is mainly an automatic basic device used to control objects and belongs to the executive element.
Uses: It can be used to control the direction, flow and speed of the medium in the control system in the tanning process.
8. Chemical Tank: for chemicals.
9. Air valve / Gas valve / Exhaust valve: For tannery barrels.
10. Electrical Control Cabinet: It is an electric cabinet that acts as an electrical control. The electrical control cabinet has traditional relay and PLC control, while the simpler control can be controlled by relay, and the complex control is generally controlled by PLC. Different control methods are used according to different needs.
